Tempilstik® 347°F / 175°C
Welding Temperature Indicator Stick
Genuine US-made surface temperature indicator stick. Melts precisely at 347°F (175°C). Accuracy ±1%°F / ±3%°C. Low-alloy steel, API 5L X52–X65, ASTM A333.
Tempilstik® 347°F / 175°C
Surface temperature indicator stick — precise melt point, no calibration needed
Product Description
Tempilstik 347°F — Applications & Standards
Verify preheat and interpass temperature for low-alloy steel and oil & gas pipelines. Controls interpass temperature.
No power source and no periodic calibration required. When the crayon mark melts on the metal surface, the temperature has reached 347°F (175°C) — a clear visual result that can be photographed for QA/QC records right on site.
Technical Knowledge
Standards-based Usage Context
📐 Applicable Standard
AWS D1.1, ASME B31.3, API 1104 — welding standards for oil & gas pipelines and pressure-bearing structures.
Low-alloy steel, API 5L X52–X65, ASTM A333.
See the full AWS D1.1 preheat temperature guide tempil.vn📖 How to Use
Correct field measurement technique
Mark the crayon on the steel surface before heating, at least 75 mm (3 in) away from the weld joint per AWS D1.1 Section 5. When the temperature reaches 347°F the mark melts — the signal that the next step may proceed. Do not measure directly on a surface just heated by an open flame.
Full Tempilstik usage guide tempil.vn⚖️ Equipment Comparison
Why not use an IR laser thermometer?
IR laser thermometers are affected by emissivity — causing 5–15% error on steel with mill scale, rust or primer. Tempilstik works by a chemical mechanism, independent of surface condition. In outdoor conditions (wind, rain) on O&G sites, Tempilstik gives more reliable results.
Detailed comparison: Tempilstik vs IR thermometer tempil.vnFeatures
Key Advantages
- Melts precisely at 347°F (175°C) — ±1%°F tolerance per AWS, ASME and API
- No power, batteries or periodic calibration — ready to use immediately on site
- Unaffected by emissivity — reliable on any steel surface condition
- Visual result (the melt mark) that can be photographed for QA/QC records
- Performs reliably outdoors in wind, rain and changing ambient temperature
- Accepted by EPC contractors and oil & gas operators on projects worldwide
- Made in USA — Certificate of Origin, Mill Certificate and full export documentation for project payment
- Box of 10 sticks or sold per stick — suits every requirement
Part Number Table
Nearby Temperature Grades
| Part # | °F | °C | Typical application |
|---|---|---|---|
| 28321 | 329°F | 165°C | Preheat/interpass, O&G pipelines |
| 28322 | 338°F | 170°C | Preheat/interpass, O&G pipelines |
| 28030 | 344°F | 173°C | Preheat/interpass, O&G pipelines |
| 28323 ★ | 347°F | 175°C | Preheat/interpass, O&G pipelines · This page |
| 28031 | 350°F | 177°C | Preheat/interpass, O&G pipelines |
| 28324 | 356°F | 180°C | Preheat/interpass, O&G pipelines |
| 28032 | 363°F | 184°C | Preheat/interpass, O&G pipelines |
Applications
Industries That Use It
(Pipeline welding)
(Jacket, Module)
(Pressure vessel)
(Shipbuilding)
(Refinery piping)
(PTSC, Lilama)
FAQ
Frequently Asked Questions
❓ Documents & Standards
Is Tempilstik 347°F accepted in a WPS?
Yes. AWS D1.1, ASME Section IX and API 1104 all accept temperature-indicating crayons such as Tempilstik as a valid temperature-measurement method. Tempilstik comes with a full Certificate of Origin, Mill Certificate and Technical Data Sheet for your project material file.
See the full Tempilstik FAQ tempil.vn❓ Storage
Shelf life and storage conditions
Tempilstik has no official expiry date when stored correctly: in a dry, cool place out of direct sunlight and away from high ambient heat. The chemical composition stays stable over time with proper storage.
Related Products
See Also
Tempilstik® 347°F
Sold by the box of 10 or per stick. Contact us for a quote with the Technical Data Sheet.
📋 Request a Quote 📞 0938888958 💬 Chat on WhatsApp✔ Authorized distributor — LACO Industries / Tempil® USA
✔ Full export documentation for customs & project payment
✔ Engineers with 10+ years of O&G experience
Technical Resources
Need a quote or technical advice?
Send your request — same business-day reply with full specs and documentation.